![]() ![]() You can send messages manually, or use the Timer function in the EMP Monitor to have messages sent automatically. Administrators can use this plug-in to send messages or announcements to one, many or all projectors over the network. Message Broadcasting is a plug-in utility for the EMP Monitor, Epson's monitoring software for projectors. Note: This plug-in requires EasyMP Monitor v4.50 or later.Īttention PowerLite 1760W, 1770W and 1775W users: The wireless LAN adapter must be installed to use this plug-in. This file extracts to your hard drive and is placed in a folder that begins with C:\epson\epson15572. If there are certain control actions which are carried out regularly at particular times or on particular days, you can use Timer Settings to register timer settings.This file contains the Message Broadcasting Plug-in v1.02 and the Message Broadcasting User's Guide. Web control functions can be used to change the settings in the projector's configuration menu. Projectors can be selected in groups or as single projectors, and you can then carry out operations for the selected projectors such as turning the power on and off and switching their input sources. You can select groups of projectors or a single projector that you are interested in, and then check the cumulative lamp operating time or the details of information such as input sources, problems, and warnings for these projectors. The power status (ON/OFF) for projectors and problems or warnings requiring attention can be checked visually by means of icons. Monitoring the statuses of registered projectors.Registered projectors can also be assigned to groups so that they can be monitored and controlled in groups.You can enter the IP addresses for target projectors to register them. ![]() Projectors on the network can be searched for automatically, and you can then select projectors to be registered from the projectors that are
0 Comments
Leave a Reply. |